What the Trim??

[Kosa]

Hey guys, cleaned out the boot of the car yesterday and was lost to where all this trim goes? is it worth keeping and cleaning up? hard to get? or cheap and can be easily replaced??

i also took pics of obscurities i found that i questioned...

i grouped like items and numbered them so it makes it easier. any help is appreciated.

1.



2.



3.





4.




5.




6.




7.




8. this goes on the back i eventually discovered, how hard are they to find and/or are there repo ones out?




9. these are weird bits... only two where in there and seem bent...

[JC074]

Pic 2 definately front windscreen (inside the car) dash covers... or whatevers they are called - 65/66 Stang

[Kosa]

... wow wouldn't of guessed that. im trying it hard to imagine them in that area, weird placing

[scott66stang]

... wow wouldn't of guessed that. im trying it hard to imagine them in that area, weird placing

thats because they are the divider trim between the upper and lower rear quarter trim and also runs between the rear window and trap door.
the 1st pic is rear window trim

Hmm looking at them again , maybe they are the dash thingy"s or maybe some of them??

[scott66stang]

pic 3 front pillar and window trim , maybe a bit of rear window trim in there aswell . 4 are roof gutter moulds around doors .
5. inner pillar and roof pillar moulds and seal holder around doors.

[MustangMedic]

Kosa, whatever you do don't bend em or throw em out, it could be expensive in the longterm.

[scott66stang]

6 not sure but i have seen them before , ill tell you when i put mine back together
7 are the rear fold down seat catches if i remember....
9 are the door window runner felts

[shermatt]

1. rear window outside trim
2. Dash pad top/ window trim
3.Front window trim (outside)
4. Drip rail trim
5. upper roof rail moulds (inner)
6. left and right lower dash pad (dont loose or bend...they dont make them)
7. Fold down seat thingies
8. goes where your holding it
9. is junk from another car....throw it out

Cheers

Matt


.

[Kosa]

awesome thanx guys!

ill put them away for now then and clean em up laterz

more things at night to shin up till mornings activities

[shane427]

Bit of fine steel wool on the bits you are keeping. Will be suprised how a bit of time will bring them up.

Most of the repro trim is well priced and fairly good quality. May need to source locally as your door triim, drip rails etc will be expensive to post

[ozbilt]

Agree with above, but do not, I repeat, do not throw anything away until the car is on the road. All stainless can be repaired & polished if necessary.

The gutter mouldings are not good repro, so repair what you have & reinstall.

[ozbilt]

BTW, I went to the wrecking yard & that rear panel that I said was there (rear deck support panel, rear window to trunk lid, underside) is no longer at the yard as he sold that burnt out fastback shell for use as a race car. I will keep looking for what you need, if nothing turns up I can make one.

[cage]

Listen to Kerry Kosa, don't throw anything out. Some of those pieces are not as easy to find as you think.