T5 bell housing swap

[nassi]

I have a T5 from an AU xr8 and would like to swap the bell housing to a LHD unit.
Is there a direct swap available?

[lukep6470]

I would think any 87-05 5.0 5 speed Mustang and any Manual 5.0 Explorer bellhousing would do the job.

[smh00n]

I still have the one you asked about a long time ago. Supposedly a LHD one. Any use??

[nassi]

I still have the one you asked about a long time ago. Supposedly a LHD one. Any use??

Sorry, I have forgotten about asking previously. Bloody craft again.
I won't commit atm as I need to know what will fit.
thanks anyway.

[nassi]

I would think any 87-05 5.0 5 speed Mustang and any Manual 5.0 Explorer bellhousing would do the job.

I will wait for confirmation, but thanks anyway.

[Husky65]

Hey mate, I put a picture up in the other thread. The other thing you need to be careful about is the extension housings. The 6cyl T5's have a longer extension housing, so the shifter hole has to be moved back on the mustang. Pretty sure the xr8 t5's have a shorter extension housing, so may not be a drama.

[nassi]

Hey mate, I put a picture up in the other thread. The other thing you need to be careful about is the extension housings. The 6cyl T5's have a longer extension housing, so the shifter hole has to be moved back on the mustang. Pretty sure the xr8 t5's have a shorter extension housing, so may not be a drama.

Thanks mate, all good info. I will looking the Dellow option. Did they do a sandwich plate as well?